您的位置:驾驶员之家 >> 驾照考试英语题库 >> 阿克苏摩托车科目四英文题库

阿克苏摩托车科目四英文题库

1、Gun powder, explosives and detonating powder belong to which of the following dangerous chemicals?

A. Oxidizing materials

B. Inflammable solid materials

C. Explosives

D. Self-igniting articles

Answer:C

2、Under such circumstance at an intersection. motor vehicle drivers should be prepared to stop and yieldat any time.

A. Right

B. Wrong

Answer:A

3、When rescuing the injured, it is necessary to ________.

A. Save life first and treat the wounds later

B. Treat the wounds first and safe life later

C. Help the slightly wounded persons first

D. Help the seriously wounded persons later

Answer:A

4、When a vehicle stops temporarily at the roadside at night, the wrong measure is to ______.

A. Turn on the warning flash light

B. Turn on the contour light

C. Turn on the high beam light

D. Turn off all lights

Answer:CD

5、When driving motor vehicles on the uphill section of a mountain road, the driver should _____.

A. Always pay attention to downstream vehicles

B. Advance at a uniform speed.

C. Avoid shifting whenever possible

D. Choosing high speed gear

Answer:ABC

6、Drivers neednt yield to pedestrians who display such behavior.

A. Right

B. Wrong

Answer:B

7、Whats the meaning of the white horizontal solid line in the circle?

A. Turning waiting line

B. Deceleration line

C. Yielding line

D. Stop line

Answer:D

8、How should the driver pass this place safely?

A. Speed up and pass in the front of the pedestrians

B. Bypass behind the pedestrians

C. Slow down and sound the horn

D. Stop and wait until the pedestrians pass

Answer:D

9、What is the meaning of this sign?

A. No going straight and no changing to left lane

B. No going straight and no left turn

C. Allowed to go straight and change to left lane

D. No going straight and no right turn

Answer:D

10、The main impact of muddy roads on safe driving is that the wheels may easily spin and skid

A. Right

B. Wrong

Answer:A

11、When overtaking a motor vehicles on uphill sections of a mountain road, the driver should _____.

A. Honk in advance

B. Forward cars are allowed to overtake before overtaking.

C. Turn on the left-turn signal in advance

D. Speed up direct and overtake

Answer:ABC

12、How to make a U turn in this intersection?

A. broken lines of the central line

B. Make a U turn from the right lane

C. Enter the intersection and make a U turn

D. Make a U turn in the crosswalk

Answer:A

13、Turning on the high-beam is an effective way to improve visibility in fog weather.

A. Right

B. Wrong

Answer:B

14、Which of the following measures is incorrect when a motor vehicle stops?

A. Stop at a stipulated place

B. Avoid stopping on pedestrian streets

C. Avoid obstructing the passing of other motor vehicles and pedestrians when temporarily stops on the road

D. Stop on the non-motor vehicle lane

Answer:D

15、What is the purpose of checking before driving?

A. Confirm whether the tyres of motor vehicles are damaged or not

B. Confirm whether there is a safety hazard near the vehicle.

C. Confirm whether there are obstacles around the vehicle

D. Confirm whether the road in front of the vehicle is safe

Answer:ABCD

16、After a traffic accident, what is the most effective measure to prevent secondary accidents?

A. Evacuate all passengers

B. Turn on the hazard lamps

C. Mark the original place of the injured persons

D. Properly place the danger warning sign

Answer:ABD

17、When rescuing a wounded person in an emergency, it is necessary to firstly stop the bleeding by compression before other methods are taken according to the conditions of bleeding.

A. Right

B. Wrong

Answer:A

18、After setting off from a roadside, motor vehicle drivers should watch both sides of the road, turn left and drive into the normal lane slowly.

A. Right

B. Wrong

Answer:A

19、When running in a high speed, if only use the front brake, the driver can be easily thrown out due to the inertia.

A. Right

B. Wrong

Answer:A

20、How to ensure motor vehicles have sufficient power when driving uphill?

A. Downshift before reducing speed

B. Downshift after reducing speed

C. Downshift when the speed is excessively low

D. Downshift to the fullest extent

Answer:A